Converting trailer brakes to an electric over hydraulic system is a multi-step process that involves upgrading your trailers stopping power and control. According to Axle Inc., the process generally follows these steps:
- Preparation and Compatibility: Start by measuring your axle dimensions (width, hub face, and spring centers) to ensure the conversion kit fits your specific axle type and load rating. This is critical for trailers hauling over 7,000 lbs.
- Component Mounting: Unpack your hydraulic disc brake conversion kit and secure the brake rotors to the axle hubs, torquing them to 80-100 ft-lbs. Next, install the hydraulic calipers over the rotors and tighten the bolts to 25-30 ft-lbs.
- Plumbing and Wiring: Route hydraulic brake hoses from the actuator to each caliper using flare fittings for secure seals. Bleed the system with DOT 3 fluid to remove any air. For the electric over hydraulic component, wire the 12V actuator to the trailer brake controller output and ground it to the frame.
- Testing: Inspect all connections for leaks and perform a low-speed test tow to confirm the system is syncing correctly with your tow vehicle.
Professional installation is recommended to ensure compliance with SAE safety standards and to guarantee proper alignment for smoother, proportional braking.
Related FAQs
-
What are the Benefits of Leaf Spring Suspension for Rv Trailers?
Read More »: What are the Benefits of Leaf Spring Suspension for Rv Trailers?Leaf spring suspension offers several key benefits for RV trailers, particularly in heavy-duty and off-road applications. According to industry experts at Axle Inc., the primary advantages include: Load Distribution and Stability: The multi-leaf steel design excels at distributing weight evenly…
-
What Tools and Components are Needed for a Trailer Brake Conversion?
Read More »: What Tools and Components are Needed for a Trailer Brake Conversion?To perform a trailer brake conversion, you will need a specific set of components and tools to ensure a safe and professional installation. The primary hardware required is either a hydraulic disc brake conversion kit (which includes calipers, rotors, hoses,…
-
What are the Steps for a Diy Trailer Brake Conversion?
Read More »: What are the Steps for a Diy Trailer Brake Conversion?To perform a DIY trailer brake conversion, follow these systematic steps provided by Axle Inc. to ensure a safe and effective installation: Preparation and Safety: Begin by assessing your current brakes and axle compatibility. Measure axle dimensions (width, hub face,…
-
How do I Convert Trailer Brakes to an Electric over Hydraulic System?
Read More »: How do I Convert Trailer Brakes to an Electric over Hydraulic System?Converting trailer brakes to an electric over hydraulic system is a multi-step process that involves upgrading your trailers stopping power and control. According to Axle Inc., the process generally follows these steps: Preparation and Compatibility: Start by measuring your axle…
-
Where can I Get a Trailer Brake Conversion in Elkhart, In?
Read More »: Where can I Get a Trailer Brake Conversion in Elkhart, In?You can obtain professional trailer brake conversion services at Axle Inc., located in Elkhart, Indiana. As a specialized provider in the RV manufacturing hub, Axle Inc. offers expert installation and conversion kits designed to enhance road safety and stopping power.…